EDM Solution 4+4, Installation Manual

Page: 83 / 174

Primary Telephone Number
LOCATION 000 - 015
0000000000000000
When the control panel requires to transmit a report, the control panel will dial this number in
an attempt to contact the monitoring station or pager etc. If the call is successful, the relevant
information will be transmitted and the dialler will return back to the stand-by mode.
If unsuccessful, the dialler will attempt two more times using the primary telephone number,
after which the secondary telephone number will be called three times. This procedure will be
repeated only once again (ie. Maximum of 12 call attempts per alarm) after ten minutes if none
of the first 6 attempts were successful
Contact your monitoring station or pager company for the relevant telephone numbers before
programming this location.
Secondary Telephone Number
LOCATION 016 - 031
0000000000000000
Refer to the Primary Telephone Number for programming information.
Callback Telephone Number
LOCATION 32 - 47
0000000000000000
This location contains the telephone number that will be called when Upload/Download is
requested or the number
6
button is held down to initiate a modem call from the control panel
to establish a communications link with the installer’s remote computer. The computer must
be running the Alarm Link Software (CC816) and will need to be set to "Waiting For An
Incoming Call". The Callback Telephone Number is also required to be programmed if
"Remote Connect With Callback Verification" on page 68 is required.
Dialler Programming Information 83
Electronics Design and Manufacturing Pty Limited ISSUE123.DOC