EDM Solution 4+4, Installation Manual

Page: 58 / 174

Fault Analysis Mode
Whenever a system fault occurs, the
FAULT
or
MAINS
indicator will flash and the codepad will
beep once every minute.
If the
MAINS
indicator is flashing, this is because the AC mains supply has been disconnected.
There is no need to determine this type of system fault. Pressing the button once will
acknowledge the AC mains fail and stop the codepad beeping once every minute.
How To Enter Fault Analysis Mode
1. Enter your followed by
5
and the button.
Two beeps will be heard and the STAY and AWAY indicators will begin to flash in
unison with the
FAULT
indicator.
One or more zone indicators (1-8) will also illuminate indicating the type of fault that
has occurred. Refer to “Fault Descriptions” on page 44 for a more detailed description
of each type of system fault.
2. Press the button to exit this function.
Two beeps will be heard and the
STAY
and
AWAY
indicators will extinguish and the
FAULT
indicator will remain illuminated.
+
5
+
Zone Indicator Fault Description
1 Low Battery
2
Date and Time
3
Sensor Watch
4 Horn Speaker Disconnected
5
Reserved
6 E
2
Fault
7 Reserved
8 Communications Failure
Table 29: Fault Indicators
5
58
Solution 4+4
Installation Manual
ISSUE123.DOC Electronics Design and Manufacturing Pty Limited