EDM Solution 4+4, Installation Manual

Page: 59 / 174

Setting The Date and Time
This function needs to be used when the date and time requires to be changed or the system has
been powered down.
How To Set The New Date and Time
1. Enter your followed by
6
and the button.
Three beeps will be heard and the
STAY
and
AWAY
indicators will begin to flash.
2. Enter the day, month, year, hour and minute using the (DD, MM, YY, HH, MM)
format.
3. Press the button when finished.
Two beeps will be heard and the STAY and AWAY indicators will extinguish.
+
6
+
Example
If the date and time needs to be set for the 1st January 1997 at 10:30 PM, program the date and
time as follows;
+
6
+
0
+
1
+
0
+
1
+
9
+
7
+
2
+
2
+
3
+
0
+
Turn Day Alarm On and Off
This function will allow you to turn day alarm on and off. Day alarm can be used to monitor
zones while the system is disarmed. Refer to Day Alarm Operation on page 95 for more
information.
How To Turn Day Alarm On
1. Enter your followed by
7
and the button.
Three beeps will be heard and day alarm will be turned on.
How To Turn Day Alarm Off
1. Enter your followed by
7
and the button.
Two beeps will be heard and day alarm will be turned off.
6
7
System Functions 59
Electronics Design and Manufacturing Pty Limited ISSUE123.DOC