EDM Solution 4+4, Installation Manual

Page: 53 / 174

Changing and Deleting User Codes
This function allows a Master Code holder to add/change or delete any of the system user
codes.
When changing or deleting user codes, it is important that you know the number of the user
you wish to change or delete.
How To Add Or Change A User Code
1. Enter your followed by
1
and the button.
Three beeps will be heard and the STAY and AWAY indicators will begin to flash.
2. Enter the (1-8) that you wish to change followed by the button.
Two beeps will be heard and the corresponding ZONE indicator will illuminate. Refer
to "Table 25: Zone Indicators Showing Relative User Numbers" on page 54.
3. Enter the digits required for the followed by the button.
Two beeps will be heard and the
STAY
and
AWAY
indicators will extinguish.
If you wish to change any further user codes, repeat this procedure as many times as required.
+
1
+
+ + + +
When adding or changing user codes, this function will automatically terminate if a
button is not pressed within sixty seconds. Pressing the button will also terminate
the session at anytime. One long beep indicates the code entered already exists or an
incorrect user number has been selected.
1
System Functions 53
Electronics Design and Manufacturing Pty Limited ISSUE123.DOC