EDM Solution 4+4, Installation Manual

Page: 39 / 174

Disarming The System From STAY Mode
There are two methods for disarming the system from STAY Mode. Method one is standard
and will always operate. Method two is optional and needs to be enabled in "LOCATION
230” on page 140.
Method two will not operate unless "Enable Single Button Arming In AWAY Mode and
STAY Mode" has been enabled in “LOCATION 230”.
Method One
How To Disarm The System From STAY Mode
1. Enter your followed by the button.
Two beeps will be heard and the
STAY
indicator will extinguish. A flashing
ZONE
indicator represents a previous alarm on that zone.
+
Method Two
A flashing
ZONE
indicator represents a previous alarm on that zone. If this is the case, a valid
user code will need to be used to disarm the system. To enable method two, Option 4 in
"LOCATION 230” on page 140 will need to be enabled.
Single button disarming from STAY Mode will report as user code number 32.
How To Disarm The System From STAY Mode
1. Hold down the button until two beeps are heard.
The
STAY
indicator will extinguish and the system will disarm.
System Indicators and Operations 39
Electronics Design and Manufacturing Pty Limited ISSUE123.DOC