EDM Solution 4+4, Installation Manual

Page: 42 / 174

Code To Isolate
1. Press the button.
2. Enter your .
3. Press the button.
Three beeps will be heard.
4. * Enter the required to be isolated followed by the button. The
zone you have just selected to be isolated will now begin to flash.
Repeat Step 4 if more than one zone is required to be isolated until all zones that are
required to be isolated have been selected.
5. Press the button when finished selecting the zones to be isolated.
Two beeps will be heard.
The isolated zones will now continue to flash until the system has next been disarmed. The
system is ready to be armed in AWAY Mode.
+ + + +
+ + +
*
As each zone is isolated, the corresponding ZONE indicator will begin to flash. If a
mistake is made, press the zone number that was incorrectly entered followed by the
button. This zone is now no longer isolated and the ZONE indicator will
extinguish.
42
Solution 4+4
Installation Manual
ISSUE123.DOC Electronics Design and Manufacturing Pty Limited