EDM Solution 4+4, Installation Manual

Page: 55 / 174

Changing Domestic Phone Numbers
This option allows a Master Code holder to view and program the required telephone numbers
that the system will call in the event of an alarm. For a more detailed description, refer to
"Domestic Reporting" on page 82 for further information.
How To Change Domestic Phone Numbers
1. Enter your followed by
2
and the button.
Three beeps will be heard and the STAY and AWAY indicators will begin to flash.
If there are telephone numbers already programmed, they will be displayed one digit at
a time via the zone indicators on the codepad. Refer to "Table 26: Zone Indicators For
Changing Phone Numbers" on page 56 for the indicators and their meanings.
If there are no telephone numbers programmed, a further two beeps will be heard after
entering this mode. These two beeps are normally heard after the last digit of the last
telephone number has been displayed.
2. Enter all the digits for , one digit at a time. You will notice as each digit is
entered, the corresponding codepad indicators will illuminate.
3. After you have entered all the digits of the first telephone number, press the
button if there is more than one telephone number to be programmed. This will insert a
break between the first telephone number and the second telephone number. If there is
only one telephone number, press the button to exit this mode.
4. Enter all the digits for , one digit at a time. You will notice as each digit is
entered, the corresponding codepad indicators will illuminate.
5. After the last digit of the second telephone number, press the button to exit this
mode unless a third telephone number is required.
+
2
+
+ + + +
How To Disable Domestic Dialling
If at any time you wish to cancel domestic dialling for any reason (eg. You are moving house
and do not wish the system to continue calling your work place or mobile phone etc), you may
enter the following sequence.
1. Enter your followed by
2
and the button.
Three beeps will be heard and the STAY and AWAY indicators will begin to flash.
2. Press the button.
3. Press the button to disable domestic dialling and exit this function.
+
2
+ + +
2
System Functions 55
Electronics Design and Manufacturing Pty Limited ISSUE123.DOC