Daikin VRV EMERION RXYQ-AATJA, Service Manual

Page: 156 / 429

Field Settings for Indoor Unit SiUS342303E
149 Part 5 Field Settings and Test Operation
1. Field Settings for Indoor Unit
1.1 Field Settings with Remote Controller
Individual function of indoor unit can be changed from the remote controller. At the time of
installation or after service inspection / repair, make the field setting in accordance with the
following description. Wrong setting may cause error. (When optional accessory is mounted on the
indoor unit, setting for the indoor unit may be required to change. Refer to information in the option
handbook.)
1.1.1 BRC1E73
<Basic screen>
(1)
<Service Settings menu screen>
(2)
Press Menu/OK button.
<Service Settings screen>
(3)
(4)
(5) (3)
(5)
Press Menu/OK button.
FIRST CODE (SW) NO.
SECOND CODE NO.
Press and hold Cancel
button for 4 seconds or
more during backlight lit.
In the case of individual
setting per indoor unit
In the case of group total
setting
1.
Press and hold Cancel bu tton for
4 seconds or more.
Ser
v ice settings men u is
displayed.
2.
Select Field Settings in the
Ser v ice Settings men u , and
press Menu/OK bu tton.
Field settings screen is
displayed.
3.
Highlight the mode, and select
desired Mode No. b y u sing
(Up/Down) bu tton.
4.
In the case of setting per indoor
u nit d u ring gro u p control (When
Mode No. s u ch as 20 , 21 , 22 ,
23 , 25 are selected), highlight the
u nit No. and select Indoor unit
No. to b e set b y u sing
(Up/Down) bu tton.
(In the case of gro u p total setting,
this operation is not needed.)
5.
Highlight SECOND CODE NO. of
the FIRST CODE NO. to b e
changed, and select desired
SECOND CODE NO. b y u sing
(Up/Down) bu tton. M u ltiple
identical mode n u m b er settings
are a v aila b le.
In the case of indi v id u al setting
per indoor u nit, c u rrent settings
are displayed. And, SECOND
CODE NO. “ - ” means no
f
u nction.
In case of setting for all indoor
u nits in the remote control
gro u p, a v aila b le SECOND
CODE NO. is displayed as “
∗
”
which means it can b e
changed.
When SECOND CODE NO. is
displayed as “ - ”, there is no
f
u nction.