Dacia Solenza 2004, Repair Manual

Page: 371 / 891

THE MECHANICAL ELEMENTS CONTROLS
37
37 - 21
DISMOUNTING
Detach from clips the cable from the
acceleration pedal ( 3 ) by harpoon ( 5 )
compressing.
Acceleration control
TIGHTENING MOMENTS (daNm)
Pedal bearing attachment nut 0.8
Dismount the bearing attachment nut ( 2 ) and
release the pedal.
REMOUNTING
Perform the dismounting operations in the
reverse order, taking into consideration the
following:
- before bearing (
6
) closing, grease the
contact parts with the pedal and check if the
pedal rotation in the bearing is done without
noises or locks;
- adjust the pedal stroke at the
“maximum” position of the valve, which is
obtained by pushing the pedal until pressing on
the limiting part (
4
).
- the tightening moment of the pedal
bearing attachment nut is of
0.8 daNm
.
ACCELERATION CABLE
Detach from clips the cable from the
acceleration pedal ( 3 ) by harpoon ( 5 )
compressing.
Release the acceleration cable ( 1 ) from the
valve lever ( A ).
Detach from clips the acceleration cable and
release it.
REMOUNTING
First attach the acceleration cable to the
valve lever (
A
), and then attach by clips the
other end on the acceleration pedal arm.
Push the acceleration pedal until pressing on
the limiting part (
4
) (
2-3 pushing
). In this
position, the length adjustment is done.
In case of the buffer replacement (
6
), the
clip from the cable is to be placed at a
34 mm
position and after that, the a.m. adjustment is
to be performed.
ACCELERATION PEDAL
vnx.su