Dacia Solenza 2004, Repair Manual

Page: 49 / 891

ENGINE E7J-262
10
ENGINE ASSEMBLY
10 - 24
ATTENTION!
Avoid foreign materials introduction
into the oil grooves, otherwise the latter
will clog, and consequently the rockers
slides and cams rapid damaging.
The cylinder head flatness is checked by
means of a ruler and a kit of gauges.
Maximal permitted deformation: 0.05 mm.
REMARK:
The cylinder head is not to be rectified.
CYLINDER HEAD ASSEMBLING
All parts are to be lubricated with oil.
Mount the valve oil sealing rings
2
on the
valve guides
3,
by means of an
11-mm
socket wrench.
The followings are to be mounted in order:
- washers 1 from valves springs bottom;
- new valves
4.
- springs
5
( identical for intake and
exhaust);
- hoods 6
Compress the springs 5 then mount the
half-cones
7
which are identical for intake and
exhaust.
ATTENTION!
New valves must have the same marking
8 with the old ones in order to avoid the
damaging of the seat/valve assembly.
Dismounting – Remounting
vnx.su