Dacia Solenza 2004, Repair Manual

Page: 192 / 891

19
19 - 5
COOLING - EXHAUST - TANK
Radiator
SPECIAL TOOLS
MOT 1202 - 01
Pliers for elastic clips
MOT 453
Hoses clamp
DISMOUNTING
Drain the air conditioning unit – for the ve-
hicles with air conditioning (see chapter 62” Fill-
ing –Draining the air conditioning circuit”).
Disconnect the battery
Dismount the air inlet duct from the battery
screen.
Detach from clips the oil reservoir from the
battery screen, for the vehicles equipped with
power steering.
Clamp the hoses from radiator by means of
MOT 453
device.
Dismount the hoses from radiator by means
of the pliers for elastic clips
MOT 1202-01
and
recover the cooling fluid.
Disconnect the engine fan connector ( 1 ).
Detach the wiring from clips (
2
) and (
3
).
Disconnect the resistance connector (
4
), for
the vehicles with air conditioning.
Carefully release the engine fan from the four
attachment clips (
5
) on the radiator- for the
vehicles equipped with air conditioning,
consequently, the four screws (
6 ) are
dismounted, for the vehicles without air
conditioning.
The vehicles without air conditioning.
Carefully remove the engine fan from the
sustaining points ( 7 ).
Dismount the radiator off the side
attachment supports on the radiator upper
cross beam.
Disconnect the two pipes from condenser.
Release the radiator from the lower
supporting buffers together with the
condenser and recover the cooling fluid from
the radiator.
Dismount the condenser attachment
screws on the cooling radiator (for vehicles
with air conditioning).
For vehicles with air conditioning.
REMOUNTING
Mount the condenser on the new cooling
radiator (for vehicles with air conditioning).
Mount the radiator-condenser assembly
on the vehicle, by supporting it in the lower
elastic supports and attach it in the supports
of the radiator upper cross beam.
Mount the engine fan assembly on the
sustaining supports (
7
) and attach it in the four
screws (for vehicles without air conditioning).
5
4
3
1
5
2
vnx.su