Dacia Solenza 2004, Repair Manual

Page: 124 / 891

IGNITION AND INJECTION
17
17 - 30
AFTER
REPARATION
Perform the operations from “recommendations” for reparation confirmation.
Fix any other possible failures.
Erase the failures memorized by the injection computer.
Perform a conformity checking by means of the CLIP tester.
Check the battery and electric mass condition of the vehicle.
Fix if necessary.
Check
the connection and the connector condition of the actuator s relay
.
Change the connector if necessary.
Check the presence of
+12 Volts at pin 1 actuators relay.
Fix if necessary.
Check the actuators relay coil.
Replace the actuators relay if necessary.
Check the insulation and continuity on line
Pin 39 injection computer > pin 2 actuators relay.
Fix if necessary
If the problem is persisting after these checking, fix the other failures then perform the conformity
checking.
RECOMMENDATIONS
Conditions for diagnostic application for memorized failure:
Set the contact on then enter in dialog with the injection computer by means
of the CLIP tester.
REMARK:
This failure is of high importance. It is then necessary to be
treated before the following ones.
Diagnostic – Failures interpretation
DF009
PRESENT
OR
MEMORIZED
ACTUATORS RELAY CONTROL CIRCUIT
1DEF : Open circuit or short-circuit
CO : open circuit
CC.O : shot circuit at mass
CC.1 : short circuit at + 12 V.
vnx.su