Dacia Solenza 2004, Repair Manual

Page: 650 / 891

87
ELECTRICAL ASSISANCE EQUIPEMENT
87 - 10
Diagnostic – general
Configuration
automatic
automatic
Type of Cockpit
Central Unit
Only at N4
Only at
N4
Denomination and symbol on CLIP tester
Ceiling lamp timing (LC021)
Radio-frequency function
(LC089)
GENERAL CONFIGURATIONS OF THE COCKPIT CENTRAL UNIT
There are the following possible configurations of the cockpit Central Unit:
INTERFACE BOX CONFIGURATION
This is performed by means of the CLIP tester, as follows:
〈 With the contact set on, enter in dialogue with the vehicle.
〈 Select and validate menu
“ Interface box”
〈 In menu
“Control module”
, validate line
“Configuration”.
〈 Select control : “CF716 : type N2” or
“CF010 : type N4”
〈
the following message shall be displayed: “Do you wish to continue?”
〈 Select
“yes”
, then perform the automatic configuration.
- For Cockpit central Unit
“base range”
or
“N2”
Configuration ceiling lamp with timer without
Configuration radio frequency function without
- For Cockpit central Unit
“high range”
or
“N4”
Configuration ceiling lamp with timer with
Configuration radio frequency function with
〈 Check then the configurations in menu “ Configuration reading”
vnx.su