Dacia Solenza 2004, Repair Manual

Page: 533 / 891

BATTERY - FRONT HEADLIGHTS
80
80 - 12
Replacement of the headlamps mechanic adjustment control
Attach on the cowl panel, by means of clips, the cables passing bushing, ensuring the cockpit
compartment sealing against possible water drain along the cables passing bushing.
Mount the bonnet opening control cable in the opening handle (see chapter
52
). Position the
headlamps adjustment control on the dashboard.
Mount the attachment nut of the headlamps adjustment control on the dashboard.
Mount the headlamps adjustment control button and turn it in the position “3”.
Mount the headlamp adjustment control to a turning lamp-headlamp assembly :
- attach in clips by means of a straight screwdriver, the headlamp adjustment control cable
in fork ( 5 ) and then in the headlamp adjustment corrector;
- tighten initially the cable by hand till the fork ( 5 ) is in contact with support ( 6 ) so that fork
is remaining at max. 0.5 mm against the support;
- block the headlamp adjustment cable by means of the nut ( 3 );
- attach in clips the protector (
2
) of the headlamp adjustment mechanism;
- position correctly the gasket of the headlamp adjustment corrector – the vertical adjustment
screw ( V ) must come out through the gasket.
Mount the headlamp adjustment control of the other turning lamp-headlamp assembly.
Attach in the attachment points, by means of clips, the headlamps adjusting control cables,
replace and mount the attachment collars, observing the mounting position prior to the dismounting.
Keep a distance of approximate
40 mm
±
10 mm between the right cable and the cylinder
no.1 spark plug cable, in order to avoid the loses due to electric-magnetic induction.
Reconnect the battery (
-
) terminal.
Switch on the headlamps and check the operation of the headlamps mechanic adjusting control.
The adjustment of the luminous spot dip of the headlamps in the downward sense of the vehicle
loading condition is to be performed by bringing the headlamps adjusting button in the “
0 ” position
and then in the desired condition.
REMARK : The required tightening moment of the attachment nut of the headlamps
adjustment control on the dashboard: 2 Nm.
vnx.su