Dacia Solenza 2004, Repair Manual

Page: 693 / 891

88
WIRING
88 - 22
Diagnostic – Help
UCE A IRBAG REPLACEMENT
New airbag computer are delivered in blocked condition in order to avoid all risks of
undesirable releasing (all releasing lines are inhibited).
This “blocked” mode is noticed by the airbag indicator lighting from the instrument panel
when setting the contact on.
In order to replace the UCE airbag, proceed as follows:
- set the contact off,
- dismount the central console tunnel,
- disconnect the UCE airbag connector,
- dismount the UCE airbag attachment screws,
- mount the new UCE airbag, the arrow from UCE airbag being oriented towards front
of the vehicle,
- reconnect UCE airbag connector,
- check the system by means of the CLIP tester,
- modify if necessary the airbag computer configuration using the control “Configuration”,
- unblock the computer only in case of a failure absence, declared by the CLIP tester.
DESIGNATION OF THE 30 WAYS UCE AIRBAG PLUGS
1. Free
2. Free
3. Free
4. Free
5. after contact
6. Mass
7. Airbag failure indicator
8. Free
9. K diagnostic line
10. Driver’s frontal airbag (+)
11. Driver’s frontal airbag (-).
12. Free
13. Free
14. Free
15. Free
16. Free
17. Free
18. Free
19. Free
20. Mass
21. Free
22. Free
23. L diagnostic line.
24. Free
25. Free
26. Free
27. Free
28. Free
29. Free
30. Not in use
vnx.su