Dacia Solenza 2004, Repair Manual

Page: 25 / 891

VALUES AND ADJUSTMENTS
07
07 - 9
Checking values of the rear axle angles
ADJUSTMENTS
Not adjustable
Not adjustable
VEHICLE
POSITION
Unloaded
Unloaded
Unloaded
VALUES
0
0
30' ± 10'
(For two wheels)
Closing
0
0
30' ± 10'
2,9 mm ± 1 mm
ANGLES
CAMBER
PARALLELISM
ELASTIC BUSHINGS
TIGHTENING
PRELIMINARY OPERATIONS TO BE OBSERVED BEFORE
CHECKING THE STEERING ANGLES
1. Area (checking surface) – it must be as horizontal as possible.
2. Wheels, tires – check (from equipping point of view) to have same type of wheels and
tires on both axles (dimensions, inflating pressure, wear degree). A pronounced wear is not
allowing the correct horizontal positioning.
3. Suspension – check the shock absorbers, springs condition and height symmetry under
carriage body.
4. Joints –
check the elastic joints condition, steering and suspension ball joints clearance,
bearings clearances of the front and rear axles
5. Radial and axial run out of the wheels –
must not be over 1 mm. This will be compensated
with the reading instruments.
6. Manufacturer’s method – each vehicle manufacturer is providing the checking conditions,
axles weights repartition, and presentation of under carriage body heights, not loaded.
vnx.su