Dacia Solenza 2004, Repair Manual

Page: 235 / 891

CV JH3 - 051
21
MECHANICAL GEARBOX
21 - 15
Gearbox dismounting
C.V. 551
BEARING DISMOUNTING OFF THE MECHANISMS CRANKCASE
The safety ring of the bearing (the holding ring) is enlarged by means of a pair of safety pincers,
then the bearing is extracted from the crankcase by hammering towards the inside of the mecha-
nisms crankcase, by means of the
C.V. 551 device.
BEARING REMOUNTING OF THE MECHANISMS CRANKCASE
Replace the safety of the bearings with a new one, then this one is introduced into its groove in
the mechanisms crankcase, so that its position is observed as compared to the crankcase (the
safety shows a shoulder).
The bearing is pressed from the exterior of the mechanisms crankcase towards the inside of it,
until the safety fits into the groove carved on the outer ring of the bearing.
Mounting of the bearing is performed by means of the
C.V. 551
device.
vnx.su