19
19 - 17
COOLING - EXHAUST - TANK
Fuel tank
DISMOUNTING
Drain the fuel tank (
4
)
Disconnect the battery.
Remove the trunk carpet.
Dismount the tank visiting cover from the
three attachment screws.
Disconnect the electric connector f the fuel
pump assembly and detach from clips the
connection from the fuel supply pipe.
Take out the spare wheel and release it
together with its support.
Remove the filling cap (
2
) and dismount the
two attachment screws of the upper filling cap.
Lift the vehicle on a two columns elevator.
Dismount the four-attachment screws (
6
) of
the fuel tank on the carriage body, then maintained
in tilted position, disconnect the rapid coupling
on the anti-overturning valve (
7
).
Detach from clips collar (
3
) of the aerating
pipe on the upper filling cap.
Release the fuel tank together with the aerating
connection.
Dismount the thermal screen (
5
) off the three
maintaining clips.
Dismount the attachment clip (
1
) of the filling
cap muff on the lower filling cap.
Dismount the fuel pump assembly by
dismounting the attachment nut by means of the
MOT 1397
device.
REMOUNTING
Perform the dismounting operations in the
reverse order.
The tightening moment of the fuel tank
attachment screws on the carriage body is of
2.1
daNm
and the tightening moment for fuel
pump assembly attachment nut, is of minimal
7daNm
.
REMARK :
Collar (1) is for single use only.
When remounting, use a new click collar
(1
), for the attachment of the lower filling cap
connection on the fuel tank.
REMARK:
At remonting, for each 2 back screws
attachement fuel tank, aply 0.002 kg
FIXAMED M 28, for to realise security
moment.
vnx.su
Summary of Contents for Solenza 2004
