Dacia Solenza 2004, Repair Manual

Page: 239 / 891

CV JH3 - 051
21
MECHANICAL GEARBOX
21 - 19
Gearbox dismounting
C.V. 552
REPLACEMENT OF THE SECONDARY SHAFT BEARINGS
The secondary shaft bearing from the mechanisms crankcase is identical to the one from the
primary shaft so that its dismounting and remounting are performed in the same way as for the
primary shaft.
Bearing dismounting and mounting in the clutch crankcase is performed by means of the
C.V.
522
device.
The bearing is set by means of a mandrel
(puncher) in four equidistant points on a
55 mm
diameter.
X = 0,9 ÷ 1,3 mm.
NOTE:
When dismounting the bearing from the clutch-differential crankcase, the deflector
located behind the bearing will be damaged, being necessary its replacement with a
new one (this is ensuring the inside oiling of the secondary shaft).
vnx.su