Dacia Solenza 2004, Repair Manual

Page: 529 / 891

BATTERY - FRONT HEADLIGHTS
80
80 - 8
HEADLAMP-FRONT LAMP ASSEMBLY SEALING
(getting fogged, it has condensation water or water penetration)
The condensation water is not affecting the lighting quality.
No
No
No
No
No
Yes
Yes
Yes
Yes
Bulbs
Check the front part of the assembly: direct
a water jet towards the headlamp glass.
Is the water penetrating inside the headlamp?
Is water penetrating inside the parking-turning
lamp?
Visually check the headlamp rear part; rubber
protector of the headlamp bulb is correctly
mounted?
The headlamp adjustment corrector is well
mounted?
The headlamp bulb is correctly mounted?
The aeration holes are clogged?
The hea dlamp is steamed out or it has
condensation water inside?
Visually check the rear part of the parking-
turning lamp; the parking bulb holder is
correctly mounted?
The turning bulb holder is correctly mounted?
Replace the headlamp.
Replace the parking-turning lamp.
Mount correctly the rubber protector of the
headlamp bulb. If this is not good, replace it.
Mount correctly the headlamp adjustment
corrector and its rubber protector. If protector
is not good, replace it.
Mount correctly the headlamp bulb.
If possible, eliminate the clogging cause. If
not possible, replace the headlamp.
Explain the client that this fact is a natural
one, not a damage and there is no headlamp
corrosion risk. The condensation water will
disappear when the headlamp will be lighted;
the disappearing time of the condensation
water is subject to the environmental
humidity.
Mount correctly the parking bulb holder. If
its gasket is not good, replace it.
Mount correctly the turning bulb holder. If
its gasket is not good, replace it.
REMARK : If the client is insisting, proceed to headlamp drying:
- blow with dry air, if possible;
- naturally dry the headlamp by turning on the headlamps for couple of minutes
till condensation water elimination or headlamp defogging.
No
No
No
No
Yes
Yes
Yes
Yes
vnx.su