Dacia Solenza 2004, Repair Manual

Page: 627 / 891

85
WINDSCREEN WIPER
85 - 1
The drive mechanism is mounted in the cli-
mate control box.
DISMOUNTING
Ensure that assembly is stopped in the
position “ stopped at fix point”.
Disconnect the battery (-) terminal.
Dismount the climate control gasket.
Dismount the climate control protector
Dismount the wiring connector (
1) from the
windscreen wiper electric motor (push on the
connector A point and detach from clips).
Remove the protectors (
2
) from shafts.
Dismount the attachment nuts ( 3 ) of the
windscreen wiper blade-arm assemblies.
Dismount the windscreen wiper blade-arm
assemblies ( 4 ). Mark the identification of their
mounting position and of the two windscreen
wiper blade-arm assemblies (left-right).
Remove the covers (
5).
Dismount the shafts attachment nuts ( 6 ) on
the windscreen lower frame; recover the washers
and gaskets.
Detach from clips the washing hose.
Dismount the mechanism attachment screw
( 7 ) on the windscreen lower crossbeam.
Extract the mechanism from the climate
control box, by rotating it.
REMOUNTING
Perform the dismounting operations in the
reverse order.
REMARK:
When mounting the drive mechanism, the
wiper electric motor must be in the position
”stopped at fix point”.
The required tightening moment of the
mechanism attachment screw (
7
) on the
windscreen lower crossbeam :
6-8 Nm.
The required tightening moment of the shafts
attachment nuts (
6
) on the windscreen lower
crossbeam:
8 ± 15 % Nm.
The required tightening moment of the
attachment nuts (
3
) of the windscreen wiper
blades and arms :
12 ± 15% Nm
.
The required tightening moment of the
attachment screw (
7
) of the windscreen washing
assembly : 2 Nm.
Drive mechanism
vnx.su