Dacia Solenza 2004, Repair Manual

Page: 674 / 891

88
WIRING
88 - 3
- select mode “ Control”.
-select function “
Actuators
”, then
validate “ Computer blocking ”
- select menu “ State list ” and ensure
that UCE airbag has been blocked.
The state
“Blocked computer”
is
becoming ACTIVE.
When this function is activated, all releasing
lines are inhibited, the airbag indicator from
instrument panel is lighted (new UCE airbag
are delivered with blocked releasing lines).
Wait 2 seconds until releasing UCE airbag
lines are inhibited.
ATTENTION!
In case of an intervention on the
vehicle (on exhaust, carriage body, etc),
block the UCE airbag by means of the
CLIP tester, wait for 2 seconds after
setting the contact off (necessary time for
automatic discharge of the UCE airbag),
then you may use hammers or shock
generating device on central floor.
After sale, any electric accessory
(speakers, anti-theft system or any device
which may be generating magnetic field,
is not to be mounted near UCE airbag.
UCE AIRBAG DISMOUNTING
Set the contact off. Disconnect the battery
(-) terminal.
Dismount the central console.
Dismount the UCE airbag connector.
Dismount the UCE airbag attachment screws
(
1
).
UCE AIRBAG REMOUNTING
Attach UCE airbag on the vehicle, the arrow
from the UCE airbag being oriented towards the
vehicle front (required tightening moment
0.8 ±
0.2 daNm
).
Reconnect the UCE airbag connector.
Mount the central console. Connect the
battery (-) terminal.
Set the contact on.
Check the system operation by means of the
CLIP tester and set the system according to the
vehicle equipping level
“With driver’s airbag”
.
If everything is correct, unblock UCE airbag. If
Airbag – Electronic control unit
1
1
vnx.su