Dacia Solenza 2004, Repair Manual

Page: 679 / 891

88
WIRING
88 - 8
Mount the two attachment screws (required tightening moment:
0.65 daNm
) located under
the steering wheel, attaching the airbag pillow.
IMPORTANT
After remounting, check the system operation, by means of the CLIP tester. If
everything is correct, unblock UCE airbag (see “Unblocking UCE airbag”). If it is not
correct, see chapter “Diagnostic. Check if the airbag indicator is lighted when setting
contact on, it is remaining lighted for 3 seconds, then it is turning off and is remaining
off.
OBSERVATION:
UCE airbag may accept up to 4 airbag releasing (some elements are loosing their
nominal characteristics). It is not necessary the systematic replacement after each airbag
releasing.
REMARK :
The driver airbag – new item number- is provided with a self-adhesive protective foil
stacked over the airbag connector. Unstacking of the protection foil is to be done
ONLY in the moment of mounting.
Driver’s airbag
vnx.su