Dacia Solenza 2004, Repair Manual

Page: 219 / 891

20
CLUTCH
20 - 7
Pressure bearing – Clutch releasing fork
REPLACEMENT
This operation is to be performed after separation of the gearbox. from engine
DISMOUNTING
Dismount:
- pressure bearing by swinging over the fork;
- protection bellows and remove the clutch-releasing fork.
REMOUNTING
Lubricate the guiding tube, slides and fork joint with grease OLISTA LONG TIME
3EP R100 137188.
Mount the fork and the protection bellows.
Mount the pressure bearing on the guiding tube with groins (
A) clips-attached on fork
Check the pressure bearing sliding on guiding tube.
REMARK:
In case of an intervention not implying the gearbox dismounting, or after gearbox
mounting, the control fork is not to be lifted because the pressure bearing groins (A)
may come out from the clutch-releasing fork.
vnx.su