Dacia Solenza 2004, Repair Manual

Page: 585 / 891

82
ACCOUSTIC WARNING - ANTI STARTING
82 - 42
Diagnostic – General
This document is presenting the diagnostic generally valid for all computers, for anti-starting
function.
In order to perform the diagnostic of this system, it is then all-important to dispose of the
following elements:
- workshop manual of the corresponding vehicle
- electric diagram of the function, for the corresponding vehicle
- special tools specified in the column “Necessary Special tools”.
GENERAL METHOD OF DIAGNOSTIC
- CLIP tester setting on, in order to identify the system that is equipping the vehicle
(identification of the computer family, program number, V. diagnostic..).
- Analysis of the “diagnostic” documents corresponding to the identified system.
- Acknowledgement of the information supplied in chapters “General”.
Reading of the memorised failure in the computer memory and taking advantage of the chapter
“Failures interpretation”.
Attention :
each failure is interpreted for a specific type of memorisation : present failure,
memorised failure, present or memorised failure). The specified checking for handling each
failure are not to be applied on the vehicle unless the declared failure is interpreted in the document
for its specific memorising type. The memorising type must be taken into consideration when the
tester is set on, after setting off and on of the contact.
If a failure is interpreted in the moment when it is declared “memorised”, the diagnostic
application conditions are present in “Recommendations”. If the conditions are not fulfilled, you
must take the ideas from the diagnostic of damaged element circuit checking, because the failure
is not anymore present on the vehicle. Apply the same method when a failure is declared as been
memorised by the diagnostic tester, but it is interpreted in the documentation only as “present”
failure state.
- Performing the conformity checking (accentuation of the possible failures, non-declared
yet by the system self-diagnostic) and application of the adequate diagnostic according to the
results.
- Reparation validation (elimination of “client’s effect”)
- Diagnostic exploitation by “Client’s effect” if the problem still on.
NECESSARY SPECIAL TOOLS FOR INTERVENTION
- CLIP diagnostic tester
- ELE 1622 electric multi-socket
- All-purpose mete
r
vnx.su