Dacia Solenza 2004, Repair Manual

Page: 570 / 891

82
ACCOUSTIC WARNING - ANTI STARTING
82 - 27
Diagnostic
ALP2. CONTACT SET ON THE ANTI STARTING INDICATOR BLINKS
(THE ENGINE IS NOT STARTING)
RECOMMENDATION -
Set the contact on.
Connect the CLIP tester.
Is there any communication with the E.C.U.
decoder ?
See ALP1
.
Check the fuse F03 for anti starting bushing
supply.
Is it good?
Replace the fuse.
Set the contact on and check if the state 4D
becomes ACTIVE ?
Is the state 19 D PASSIVE ?
Perform « Procedure for replacement
E.C.U. decoder and memorising anti
starting code » if the starter is new ;
if it’s not new, replace it.
Set the contact off. The anti starting indicator
will start to blink after 10 seconds.(ACTIVE
anti starting ).
Set again the contact and check: the failure
« Defective communication decoder bushing ».
Does exist such a failure ?
Study « DEFECTIVE
COMMUNICATION BUSHING
– DECODER » from the chapter
DIAGNOSTIC.
Study « STATE 4D : 12
V » from chapter DIAGNOSTIC.
Try the engine starting with the second key.
Is the engine starting ?
Replace the first key.
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
vnx.su