Dacia Solenza 2004, Repair Manual

Page: 345 / 891

36
STEERING ASSEMBLY
36 - 12
Power steering pump
SPECIAL TOOLS
MOT 453 Flexible piping pliers
DIR 1083-01 Device for PDA pul ley remounting
PS 1094 Bearing extractor
TIGHTENING MOMENTS (daNm)
Screws for D.A. pump attachme nt 5
Screws for D.A. pump pulley attachment 0.8
Place the vehicle on a two-column elevator.
DISMOUNTING
Disconnect the battery.
Drain the oil from DA circuit
Loosen the attachment screws (
S
1
) of the
tightening clamp.
Dismount the adjustment screw (
S
2
)
allowing the tightening clamp lowering.
Dismount the accessories belt.
Dismount the three pulley attachment screws
to the hub and extract the pulley.
Disconnect from the power steering pump
the supply piping and the high pressure piping.
Dismount the power steering pump
attachment screws to the support:
- four screws in case of the DA/CA pump.
- Three screws in case of the DA pump
without CA
REMOUNTING
Perform the dismounting operations in the
reverse order, observing the following:
- the screws tightening sequence, i.e. :
-
1-2-3-4
- in case of the DA/CA
pump;
- 1-2-3 - in case of the DA pump
without CA, as well as the tightening
moments.
Mount a new accessories belt.
Adjust the belt tension (see the method
described in chapter
07 – Tensioning, belts,
accessories ).
Perform the filling of the DA unit, then
perform the unit purging ( method described
in chapter
05 ).
S
2
S
1
S
1
vnx.su