Dacia Solenza 2004, Repair Manual

Page: 103 / 891

IGNITION AND INJECTION
17
17 - 9
ANTI-STARTING INDICATOR
When setting the contact on, UCE injection is receiving from UCE DECODER a code, which is compared
with the one previously memorized; if the two codes are matching, then the engine starting is authorized.
After contact setting on, anti-starting indicator which was previously blinking, will light for
three seconds then it will go off, confirming in this way, the key recognizing.
If the key is not good, after setting on the contact, the anti-starting indicator will start blinking
faster and the engine starting will be impossible.
OBSERVATION:
For details regarding the vehicle anti-starting system, see chapter 82 “Anti-starting system”.
ATTENTION!
UCE injection connecting or disconnecting to the vehicle’s wiring is to be performed
Injection system
only when the engine is stopped and the contact off.
If the contact is on or the engine is running, do not loosen or disconnect the battery
terminals. It is forbidden the battery replacement on the vehicle if the engine is running
or the contact on.
Loosen or rusty contacts at battery terminals and imperfect connections at the
injection system wiring are not allowed.
It is forbidden the engine starting with the battery connected to a charging / starting
unit.
The battery recharging is to be performed only after disconnecting it from the vehicle
wiring and by means of a charging unit with 12 V voltage.
vnx.su