Dacia Solenza 2004, Repair Manual

Page: 677 / 891

88
WIRING
88 - 6
CHECKING OF THE AIRBAG SYSTEM CIRCUITS.
The transmitting wiring of the airbag-releasing signal is integrated in the front wiring.
In case of an abnormality noticed on the transmitting wiring of the airbag-starting signal, this
is to be replaced and not repaired.
The security device can not tolerate any classical reparation intervention of this wiring or of
the connectors.
ATTENTION !
When repositioning the new wiring, ensure that this one is not in contact with sharpen
edges which may destroy it.
REMARK:
The airbag electric wires test is to be performed as follows:
- Set the contact off
- Connect the CLIP tester to the vehicle
- Set the contact on
- Block UCE airbag
- Set the contact off
- Disconnect the battery (-) terminal
- Dismount the central console
- Dismount the airbag attachment screws.
- Disconnect the airbag connector
- Connect the inert igniter.
- Disconnect the UCE airbag connector and connect the 30 pins adapter connector instead
of UCE airbag and the 30 pins adapter exit cables are to be connected, one by one to the CLIP
Airbag – Electronic control unit
vnx.su