Dacia Solenza 2004, Repair Manual

Page: 245 / 891

CV JH3 - 051
21
MECHANICAL GEARBOX
21 - 25
CONTROL AXLE DISMOUNTING
This operation is to be performed after crank-
cases separation.
The control axle is provided with a blocking
element “LOCTOU” –(A) attached on the
crankcase.
The sealing is ensured by means of the tore
gasket (B).
Remove the elastic pin of the selection lever
(C),
then dismount the attachment screws, and
retrieve the control axle assembly.
In order to replace the bearing bushing of the control axle, the
CV 1162
device, or a tube with
the outer diameter 16.5 mm are to be used. Before mounting the bushing shall be oiled.
CONTROL AXLE REMOUNTING
When remounting the control axle, replace the selection finger pin with a new one.
Remounting is done by performing the dismounting operations in the reverse order, after all
parts have been oiled with oil.
Tighten all attachment screws of the control axle assembly at the required moment of
2 daNm.
Gearbox dismounting
vnx.su