Dacia Solenza 2004, Repair Manual

Page: 247 / 891

CV JH3 - 051
21
MECHANICAL GEARBOX
21 - 27
Mount the elastic pin for reverse driving axle
attachment by means of the C.V. 560 mandrel.
Ensure the correct positioning of the two cen-
tering bushings and of the magnet.
Mount the springs and the locking balls 1-2
and
3-4
in the mechanisms crankcase, then the
false axes
A
with a
13-mm
diameter are intro-
duced.
Check the positioning of the 5 th gear oiling
collector and of the aerating connection.
Additionally, ensure (check) if the aerating tube
is not damaged or clogged.
Apply a continuos layer of LOCTITE
518 on the gasket surface between the clutch
crankcase and the mechanism crankcase.
Engage the
3 -d
gear.
Mount the spring and the 5 th gear lock-
ing ball into the crankcase of the mechanism.
Compress the locking ball and mount the
mechanisms crankcase.
Mount the attachment screws and tighten
them at the required moment of
2,5 daNm
,
after rotating the primary shaft, in order to
ensure o correct bearings setting.
Retrieve the false axes.
REMARK :
The tightening at the required mo-
ment of all the screws must be done in
no more than 30 minutes after the
mounting of the mechanisms crankcase,
because of the polymerization of
LOCTITE 518.
Gearbox dismounting
vnx.su