Dacia Solenza 2004, Repair Manual

Page: 234 / 891

CV JH3 - 051
21
MECHANICAL GEARBOX
21 - 14
SHAFTS
THE PRIMARY SHAFT
.
The primary shaft shall not be repaired and is not adjustable.
The shaft has a groove (
B ) for oiling the 5 -th gear free pinion.
Clean the oiling – groove of the 5 th gear
The oil seal ring in front of the shaft and the bearing cams are in direct contact with the shaft.
Check the condition of the shaft surface in the operation area (
A
) of the oil seal; ring , and if
this shows ridges or irregularities, it will be replaced.
REPLACING THE BEARINGS OF THE PRIMARY SHAFT
The bearings of the primary shaft are freely mounted on it
There are two types of bearings:
- a cylindrical one with balls, pressed into the mechanism crankcase;
- a cylindrical one with rolls, pressed into the clutch-differential crankcase, together with
the clutch shaft oil seal ring.
The bearings replacement is to be done only with identical bearings with the original
ones.
Gearbox dismounting
vnx.su