Dacia Solenza 2004, Repair Manual

Page: 189 / 891

19
19 - 2
COOLING - EXHAUST - TANK
The heating radiator has no valve.
The fluid circulation is permanently done in the heating radiator, this leading to the engine
cooling.
FILLING
Open the purging screw located on the water pipe between engine and climate control radiator.
Fill up the circuit by the expansion vessel hole
Tighten the purging screws in the moment when the fluid is flowing in a continuos jet.
Start the engine, maintaining it at
2500 rot/min
.
Adjust the fluid level in the expansion vessel, during about
4 minutes.
Close the cap of the expansion vessel.
PURGING
Let the engine run for
10
minutes at
2500 rot/min
, until engine fan starting (necessary
period for automatic gas purge).
Check if the fluid level in the expansion vessel is nearby the mark “Max”.
Do not open the purging screws with the engine running.
Retighten the expansion vessel cap with the warm engine.
Filling - Purging
vnx.su