manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 98 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 98

 

4-34

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 4      Configuring Security Contexts

  Managing Security Contexts

Step 4

To enter the new URL, enter the following command:

hostname(config)# 

config-url

 

new_url

The system immediately loads the context so that it is running.

Reloading a Security Context

You can reload the context in two ways:

•

Clear the running configuration and then import the startup configuration.

This action clears most attributes associated with the context, such as connections and NAT tables. 

•

Remove the context from the system configuration.

This action clears additional attributes, such as memory allocation, which might be useful for 
troubleshooting. However, to add the context back to the system requires you to respecify the URL 
and interfaces.

This section includes the following topics:

•

Reloading by Clearing the Configuration, page 4-34

•

Reloading by Removing and Readding the Context, page 4-35

Reloading by Clearing the Configuration

To reload the context by clearing the context configuration, and reloading the configuration from the 
URL, perform the following steps:

Step 1

To change to the context that you want to reload, enter the following command:

hostname#

 changeto context

 

name

Step 2

To access configuration mode, enter the following command:

hostname/

name

# 

configure terminal

Step 3

To clear the running configuration, enter the following command:

hostname/

name

(config)# 

clear configure all

This command clears all connections.

Step 4

To reload the configuration, enter the following command:

hostname/

name

(config)# 

copy startup-config running-config

The FWSM copies the configuration from the URL specified in the system configuration. You cannot 
change the URL from within a context.

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments