manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 176 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 176

 

8-34

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 8      Configuring IP Routing and DHCP Services

  Configuring Route Health Injection

Step 4

To inject connected routes, enter the following command:

hostname(config-route-inject)# 

redistribute

 

connected 

[

route-map

 

map_name

 | 

access-list

acl_id

] 

interface

 

interface_name 

where the 

interface

 

interface_name

 argument specifies the FWSM interface; this interface IP address is 

used as the next-hop IP address in the routes that are injected.

By default, all connected routes are injected. 

If you want to limit the routes injected, you can specify the

 route-map

 or

 access-list

 argument; only 

matching addresses are injected.

You can enter only one 

redistribute connected 

command.

Step 5

To inject static routes, enter the following command:

hostname(config-route-inject)# 

redistribute

 

static 

[

route-map

 

map_name

 | 

access-list

acl_id

] 

interface

 

interface_name 

where the 

interface

 

interface_name

 argument specifies the FWSM interface; this interface IP address is 

used as the next-hop IP address in the routes that are injected.

By default, all static routes are injected. 

If you want to limit the routes injected, you can specify the

 route-map

 or

 access-list

 argument; only 

matching addresses are injected.

You can enter only one 

redistribute static 

command.

The following example injects NAT addresses that match access list 

acl1

; 209.165.201.0/30 is injected 

with a nexthop of 209.165.200.225

 

(the active IP address of the outside interface) on VLAN 20. The 

209.165.201.10 through .16 addresses are not injected.

hostname(config)# 

interface

 

vlan20

hostname(config-if)# 

nameif outside

hostname(config-if)# 

ip address 209.165.200.225 255.255.255.224 standby 209.165.200.226

hostname(config-if)# 

exit

hostname(config)# 

access-list acl1 standard permit 209.165.201.0 255.255.255.252 

hostname(config)# 

global (outside) 10 209.165.201.1-209.165.201.2 netmask 255.255.255.0 

hostname(config)# 

global (outside) 10 209.165.201.10-209.165.201.16 netmask 255.255.255.0 

hostname(config)# 

route-inject

 

hostname(config-route-inject)# 

redistribute nat access-list acl1 interface outside

The following example injects 209.165.202.129 through .131 and 209.165.202.140 through .146 with a 
nexthop 209.165.200.250 on VLAN 20. The global pools on the dmz interface, and the global pool 20 
on the outside interface are not included.

hostname(config)# 

interface vlan20

hostname(config-if)# 

nameif outside

hostname(config-if)# 

ip address 209.165.200.250 255.255.255.224 standby 209.165.200.251

hostname(config-if)#

 exit

hostname(config)#

 global (dmz) 10 209.165.201.1-209.165.201.10 netmask 255.255.255.0

hostname(config)# 

global (outside) 10 209.165.202.129-209.165.202.131 netmask 

255.255.255.0 

hostname(config)#

 global (outside) 10 209.165.202.140-209.165.202.146 netmask 

255.255.255.0 

hostname(config)# 

global (outside) 20 209.165.202.150-209.165.202.155 netmask 

255.255.255.0 

hostname(config)# 

route-inject 

hostname(config-route-inject)# 

redistribute nat global-pool 10 interface outside

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments