manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 567 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 567

C H A P T E R

 

25-1

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

25

Monitoring the Firewall Services Module

This chapter describes how to configure logging and SNMP for the FWSM. It also describes the contents 
of syslog messages and the syslog message format. 

This chapter does not provide comprehensive information about all monitoring, logging, and SNMP 
commands and options. For detailed descriptions and additional commands, see the 

Catalyst 6500 Series 

Switch and Cisco 7600 Series Router Firewall Services Module Command Reference

. 

This chapter includes the following sections:

•

Configuring and Managing Syslog Messages, page 25-1

•

Configuring SNMP, page 25-20

Configuring and Managing Syslog Messages

This section describes the logging functionality and configuration. It also describes the syslog message 
format, options, and variables. This section includes the following topics:

•

Logging Overview, page 25-1

•

Enabling and Disabling Logging, page 25-2

•

Configuring Log Output Destinations, page 25-4

•

Filtering Syslog Messages, page 25-11

•

Customizing the Log Configuration, page 25-15

•

Understanding Syslog Messages, page 25-19

Logging Overview

The FWSM supports the generation of an audit trail of syslog messages that describe its activities (for 
example, what kinds of network traffic has been allowed and denied) and enables you to configure 
system logging. 

All syslog messages have a default severity level. You can reassign a message to a new severity level, if 
necessary. When you choose a severity level, logging messages from that level and lower levels are 
generated. Messages from a higher level are not included. The higher the severity level, the more 
messages are included. For more information about logging and syslog messages, see 

Catalyst 6500 

Series Switch and Cisco 7600 Series Router Firewall Services Module System Log Messages

.

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments