manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 208 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 208

 

11-4

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 11      Configuring AAA Servers and the Local Database

  AAA Server and Local Database Support

RADIUS Server Support

The FWSM supports RADIUS servers.

This section contains the following topics:

•

Authentication Methods, page 11-4

•

Attribute Support, page 11-4

•

Server Support, page 11-4

Authentication Methods

The FWSM supports the following authentication methods with RADIUS:

•

PAP

•

CHAP

•

MS-CHAPv1

•

MS-CHAPv2

MS-CHAPv2 supports password management when the RADIUS server communicates with a 
Windows Active Directory server. When your password expires, you are prompted to change your 
password (see the

 auth-prompt

 command).

Attribute Support

The FWSM supports the following sets of RADIUS attributes:

•

Authentication attributes defined in RFC 2138.

•

Accounting attributes defined in RFC 2139.

•

RADIUS attributes for tunneled protocol support, defined in RFC 2868.

•

Cisco IOS VSAs, identified by RADIUS vendor ID 9.

•

Cisco VPN-related VSAs, identified by RADIUS vendor ID 3076.

•

Microsoft VSAs, defined in RFC 2548.

RADIUS Authorization Functions

The FWSM can use RADIUS servers for user authorization for network access using dynamic access 
lists or access list names per user. To implement dynamic access lists, you must configure the RADIUS 
server to support it. When the user authenticates, the RADIUS server sends a downloadable access list 
or access list name to the security appliance. Access to a given service is either permitted or denied by 
the access list. The security appliance deletes the access list when the authentication session expires. 

Server Support

The security appliance supports  authentication with ASCII, PAP, CHAP, and MS-CHAPv1.

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments