manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 186 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 186

 

9-2

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 9      Configuring Multicast Routing

  Enabling Multicast Routing

Note

If the FWSM is the PIM RP, use the untranslated outside address of the FWSM as the RP address.

Enabling Multicast Routing

Enabling multicast routing lets the FWSM forward multicast packets. Enabling multicast routing 
automatically enables PIM and IGMP on all interfaces. To enable multicast routing, enter the following 
command.

hostname(config)# 

multicast-routing

Note

Multicast routing on the FWSM is limited to eight outgoing interfaces.

The number of entries in the multicast routing tables are limited by the amount of RAM on the system. 

Table 9-1

 lists the maximum number of entries for specific multicast tables based on the amount of RAM 

on the FWSM. Once these limits are reached, any new entries are discarded.

Configuring IGMP Features

IP hosts use IGMP to report their group memberships to directly connected multicast routers. IGMP uses 
group addresses (Class D IP address) as group identifiers. Host group address can be in the range 
224.0.0.0 to 239.255.255.255. The address 224.0.0.0 is never assigned to any group. The address 
224.0.0.1 is assigned to all systems on a subnet. The address 224.0.0.2 is assigned to all routers on a 
subnet. 

When you enable multicast routing on the FWSM, IGMP Version 2 is automatically enabled on all 
interfaces. 

Note

Only the

 no igmp

 command appears in the interface configuration when you use the 

show run

 

command. If the 

multicast-routing

 command appears in the device configuration, then IGMP is 

automatically enabled on all interfaces.

This section describes how to configure optional IGMP setting on a per-interface basis. This section 
includes the following topics:

•

Disabling IGMP on an Interface, page 9-3

•

Configuring Group Membership, page 9-3

•

Configuring a Statically Joined Group, page 9-3

Table 9-1

 Entry Limits for Multicast Tables

Table

16 MB 128 MB 128+ MB

MFIB

1000

3000

5000

IGMP Groups

1000

3000

5000

PIM Routes

3000

7000

12000

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments