manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 713 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 713

 

Glossary

GL-11

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

LDAP

Lightweight Directory Access Protocol. LDAP provides management and browser applications with 
access to X.500 directories.

LDP

Label Distribution Protocol.

LLA

link-local address.

M

mask

A 32-bit mask that shows how an 

Internet

 address is divided into network, subnet, and host parts. The 

mask has ones in the bit positions to be used for the network and subnet parts, and zeros for the host 
part. The mask should contain at least the standard network portion, and the subnet field should be 
contiguous with the network portion.

MCR

See 

multicast

.

MC router

Multicast (MC) routers route multicast data transmissions to the hosts on each LAN in an internetwork 
that are registered to receive specific multimedia or other broadcasts. See also 

multicast

.

MD5

Message Digest 5. A one-way hashing algorithm that produces a 128-bit hash. Both MD5 and 

SHA-1

 

are variations on MD4 and are designed to strengthen the security of the MD4 hashing algorithm. 

SHA-1

 is more secure than MD4 and MD5. Cisco uses hashes for authentication within the 

IPSec

 

framework. Also used for message authentication in SNMP v.2. MD5 verifies the integrity of the 
communication, authenticates the origin, and checks for timeliness. 

MD5

 has a smaller digest and is 

considered to be slightly faster than 

SHA-1

.

MDI

Media dependent interface.

MDIX

Media dependent interface crossover.

Message Digest

A message digest is created by a hash algorithm, such as 

MD5

 or 

SHA-1

, that is used for ensuring 

message integrity.

MSFC

Multilayer Switch Feature Card. The Multilayer Switch Feature Card is a router card installed in the 
Catalyst 6500 switch or Cisco 7600 router.

MGCP

Media Gateway Control Protocol. Media Gateway Control Protocol is a protocol for the control of 
VoIP calls by external call-control elements known as media gateway controllers or call agents. MGCP 
merges the IPDC and 

SGCP

 protocols.

Mode

See 

Access Modes

.

Mode Config

See 

IKE Mode Configuration

.

Modular Policy 
Framework

Modular Policy Framework. A means of configuring FWSM features in a manner to similar to Cisco 
IOS software Modular 

QoS

 CLI.

MS

mobile station. Refers generically to any mobile device, such as a mobile handset or computer, that is 
used to access network services. 

GPRS

 networks support three classes of MS, which describe the type 

of operation supported within the 

GPRS

 and the 

GSM

 mobile wireless networks. For example, a Class 

A MS supports simultaneous operation of 

GPRS

 and 

GSM

 services.

MS-CHAP

Microsoft 

CHAP

.

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments