manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 107 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 107

C H A P T E R

 

5-1

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

5

Configuring the Firewall Mode

This chapter describes how to set the firewall mode, as well as how the firewall works in each firewall 
mode. You can set the firewall mode independently for each context in multiple context mode. 

The FWSM (or each context in multiple mode) can run in one of two firewall modes:

•

Routed mode

•

Transparent mode

This chapter includes the following sections:

•

Routed Mode Overview, page 5-1

•

Transparent Mode Overview, page 5-7

•

Setting Transparent or Routed Firewall Mode, page 5-17

Routed Mode Overview

In routed mode, the FWSM is considered to be a router hop in the network. It can use OSPF, EIGRP, 
passive RIP (in single context mode), and BGP in stub mode. Routed mode supports many interfaces, 
and each interface is on a different subnet. You can share interfaces between contexts, with some 
limitations.

•

IP Routing Support, page 5-1

•

How Data Moves Through the FWSM in Routed Firewall Mode, page 5-2

IP Routing Support

The FWSM acts as a router between connected networks, and each interface requires an IP address on a 
different subnet. In single context mode, the routed firewall supports OSPF, EIGRP, RIP (in passive 
mode), and BGP in stub mode. Multiple context mode supports static routes only and BGP in stub mode. 
We recommend using the advanced routing capabilities of the upstream and downstream routers instead 
of relying on the FWSM for extensive routing needs.

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments