manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 220 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 220

 

12-4

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 12      Configuring Certificates

  Certificate Configuration

Preparing for Certificates

Before you configure a FWSM with certificates, be sure that the FWSM is correctly configured to 
support certificates. An incorrectly configured FWSM can cause enrollment to fail or create a certificate 
that includes inaccurate information.

To prepare the FWSM for certificates, perform the following steps:

Step 1

Be sure that the hostname and domain name of the FWSM are configured correctly. To view the 
hostname and domain name as currently configured, enter the following command:

hostname(config)# 

show running-config

 

For information about configuring the hostname, see the 

“Setting the Hostname” section on page 7-3

.

For information about configuring the domain name, see the 

“Setting the Domain Name” section on 

page 7-4

.

Step 2

Be sure that the FWSM clock is set accurately before configuring the CA. Certificates have a date and 
time on which they become valid and then expire. When the FWSM enrolls with a CA and obtains a 
certificate, the FWSM checks that the current time is within the valid range for the certificate. If the time 
is outside that range, enrollment fails.

For information about setting the clock, see the 

“hostname(config)# domain-name example.com” 

section on page 7-4

.

Generating Key Pairs

Key pairs are RSA keys, as discussed in the 

“About Key Pairs” section on page 12-2

. You must generate 

key pairs for the types of certification that you want to use.

To generate key pairs, perform the following steps:

Step 1

Generate the types of key pairs needed for your PKI implementation. To do so, perform the following 
steps, as applicable:

a.

To generate RSA key pairs, enter the following command.

hostname/contexta(config)#

 crypto key generate rsa

If you do not use additional keywords, executing this command generates one, general-purpose RSA 
key pair. Because the key modulus is not specified, the default key modulus of 1024 bits is used. You 
can specify other modulus sizes with the 

modulus

 keyword.

Note

Many SSL connections using identity certificates with RSA key pairs that exceed 1024 bits 
can cause high CPU usage on the FWSM and rejected clientless logins.

You can also assign a label to each key pair using the 

label

 keyword. The label is referenced by the 

trustpoint that uses the key pair. If you do not assign a label, the key pair is automatically labeled 

Default-RSA-Key

.

b.

To assign a label to each key pair, enter the following command:

hostname/contexta (config)#

 crypto key generate rsa label 

key-pair-label

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments