manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 455 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 455

 

22-39

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 22      Applying Application Layer Protocol Inspection

  GTP Inspection

Verifying and Monitoring GTP Inspection

To display GTP configuration, enter the 

show service-policy inspect gtp 

command in privileged EXEC 

mode. For the detailed syntax for this command, see the command page in the 

Catalyst 6500 Series 

Switch and Cisco 7600 Series Router Firewall Services Module Command Reference

. 

Use the 

show service-policy inspect gtp statistics

 command to show the statistics for GTP inspection. 

The following is sample output from the 

show service-policy inspect gtp statistics

 command.

hostname# 

show service-policy inspect gtp statistics

GPRS GTP Statistics:

  version_not_support               0     msg_too_short             0

  unknown_msg                       0     unexpected_sig_msg        0

  unexpected_data_msg               0     ie_duplicated             0

  mandatory_ie_missing              0     mandatory_ie_incorrect    0

  optional_ie_incorrect             0     ie_unknown                0

  ie_out_of_order                   0     ie_unexpected             0

  total_forwarded                   0     total_dropped             0

  signalling_msg_dropped            0     data_msg_dropped          0

  signalling_msg_forwarded          0     data_msg_forwarded        0

  total created_pdp                 0     total deleted_pdp         0

  total created_pdpmcb              0     total deleted_pdpmcb      0

  pdp_non_existent                  0

You can use the vertical bar (|) to filter the display. Type 

?|

 for more display filtering options.

Use the 

show service-policy inspect gtp pdp-context

 command to display PDP context-related 

information. The following is sample output from the 

show service-policy inspect gtp pdp-context

 

command.

hostname# 

show service-policy inspect gtp pdp-context detail

1 in use, 1 most used, timeout 0:00:00

Version TID                  MS Addr        SGSN Addr    Idle      APN

v1      1234567890123425         10.0.1.1        10.0.0.2 0:00:13  gprs.example.com

    user_name (IMSI): 214365870921435    MS address:         10.5.1.1

    primary pdp: Y                       nsapi: 2

    sgsn_addr_signal:        10.0.0.2    sgsn_addr_data:          10.0.0.2

    ggsn_addr_signal:        10.1.1.1    ggsn_addr_data:          10.1.1.1

    sgsn control teid:     0x000001d1    sgsn data teid:        0x000001d3

    ggsn control teid:     0x6306ffa0    ggsn data teid:        0x6305f9fc

    seq_tpdu_up:                    0    seq_tpdu_down:                 0

    signal_sequence:                0

    upstream_signal_flow:          0     upstream_data_flow:          0

    downstream_signal_flow:        0     downstream_data_flow:        0

    RAupdate_flow:                 0

The PDP context is identified by the tunnel ID, which is a combination of the values for IMSI and 
NSAPI. A GTP tunnel is defined by two associated PDP contexts in different GSN nodes and is 
identified with a Tunnel ID. A GTP tunnel is necessary to forward packets between an external packet 
data network and a MS user.

You can use the vertical bar (|) to filter the display, as in the following example:

hostname# 

show service-policy gtp statistics | grep gsn

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments