manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 226 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 226

 

12-10

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 12      Configuring Certificates

  Certificate Configuration

aaa-server TacacsServers host 100.136.0.3

timeout 22

key secretpassword

aaa authentication match FWACL outside TacacsServers

aaa accounting match FWACL outside TacacsServers

aaa authentication secure-http-client

auth-prompt prompt (JCPIX249) Login:

auth-prompt accept (JCPIX249) Login Accepted!

auth-prompt reject (JCPIX249) Login Rejected!

The 

access-list

 series of commands defines which protocols are allowed through the FWSM. Only those 

shown in the example and SSH are supported for cut-through-proxy authentication. 

The 

timeout uauth

 command allows the FWSM to re-request authorization for all those protocols in five 

minutes. 

The 

aaa authentication

 command is cut-through-proxy authentication. Executing this command 

matches the protocols in the access list, and intercepts and prompts users for authentication. 

The 

auth-prompt

 series of commands changes the prompt that users see, so you know that the FWSM 

is making the request.

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments