manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 687 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 687

 

E-1

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

A P P E N D I X

E

Addresses, Protocols, and Ports

This appendix provides a quick reference for IP addresses, protocols, and applications. This appendix 
includes the following sections:

•

IPv4 Addresses and Subnet Masks, page E-1

•

IPv6 Addresses, page E-5

•

Protocols and Applications, page E-11

•

TCP and UDP Ports, page E-11

•

Local Ports and Protocols, page E-14

•

ICMP Types, page E-15

IPv4 Addresses and Subnet Masks

This section describes how to use IPv4 addresses with FWSM. An IPv4 address is a 32-bit number 
written in dotted-decimal notation: four 8-bit fields (octets) converted from binary to decimal numbers, 
separated by dots. The first part of an IP address identifies the network on which the host resides, while 
the second part identifies the particular host on the given network. The network number field is called 
the network prefix. All hosts on a given network share the same network prefix but must have a unique 
host number. In classful IP, the class of the address determines the boundary between the network prefix 
and the host number.

This section includes the following topics:

•

Classes, page E-2

•

Private Networks, page E-2

•

Subnet Masks, page E-2

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments