manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 102 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 102

 

4-38

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 4      Configuring Security Contexts

  Managing Security Contexts

                 gold               1       D          5          5      5.00%

                 silver             1      CA         10         10     10.00%

                 bronze             0      CA          5                     

                 All Contexts:      3                            20     20.00%

Telnet           default          all       C          5                     

                 gold               1       D          5          5      5.00%

                 silver             1      CA         10         10     10.00%

                 bronze             0      CA          5                     

                 All Contexts:      3                            20     20.00%

Xlates           default          all      CA  unlimited                     

                 gold               1      DA  unlimited                     

                 silver             1      CA      23040      23040     10.00%

                 bronze             0      CA      11520                     

                 All Contexts:      3                         23040     10.00%

mac-addresses

 default          all       C      65535                     

                 gold               1       D      65535      65535    100.00%

                 silver             1      CA       6553       6553      9.99%

                 bronze             0      CA       3276                     

                 All Contexts:      3                        137623    209.99%

Table 4-5

 shows each field description.

Table 4-5

show resource allocation detail Fields

Field

Description

Resource

The name of the resource that you can limit.

Class

The name of each class, including the default class.

The All contexts field shows the total values across all classes.

Mmbrs

The number of contexts assigned to each class.

Origin

The origin of the resource limit, as follows:

•

A—You set this limit with the 

all

 option, instead of as an individual resource.

•

C—This limit is derived from the member class.

•

D—This limit was not defined in the member class, but was derived from the 
default class. For a context assigned to the default class, the value will be “C” 
instead of “D.”

The FWSM can combine “A” with “C” or “D.”

Limit

The limit of the resource per context, as an absolute number. If you specified a 
percentage in the class definition, the FWSM converts the percentage to an absolute 
number for this display.

Total

The total amount of the resource that is allocated across all contexts in the class. 
The amount is an absolute number of concurrent instances or instances per second. 
If the resource is unlimited, this display is blank.

% of Avail

The percentage of the total system resources that is allocated across all contexts in 
the class. If the resource is unlimited, this display is blank.

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments