manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 371 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 371

 

18-11

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 18      Applying Filtering Services

  Viewing Filtering Statistics and Configuration

The following is sample output from the 

show url-block block statistics 

command:

hostname# 

show url-block block statistics

URL Pending Packet Buffer Stats with max block  128 

----------------------------------------------------- 

Cumulative number of packets held:              896

Maximum number of packets held (per URL):       3

Current number of packets held (global):        38

Packets dropped due to

       exceeding url-block buffer limit:        7546

       HTTP server retransmission:              10

Number of packets released back to client:      0

This shows the URL block statistics.

Viewing Caching Statistics

The following is sample output from the 

show url-cache 

command:

hostname# 

show url-cache

URL Filter Cache Stats

----------------------

    Size :     128KB

 Entries :      1724

  In Use : 

456

 Lookups : 

45

    Hits :         8

This shows how the cache is used.

Viewing Filtering Performance Statistics

The following is sample output from the 

show perfmon 

command:

hostname# 

show perfmon

PERFMON STATS:    Current      Average

Xlates               0/s          0/s

Connections          0/s          2/s

TCP Conns            0/s          2/s

UDP Conns            0/s          0/s

URL Access           0/s          2/s

URL Server Req       0/s          3/s

TCP Fixup            0/s          0/s

TCPIntercept         0/s          0/s

HTTP Fixup           0/s          3/s

FTP Fixup            0/s          0/s

AAA Authen           0/s          0/s

AAA Author           0/s          0/s

AAA Account          0/s          0/s

This shows URL filtering performance statistics, along with other performance statistics. The filtering 
statistics are shown in the URL Access and URL Server Req rows.

Viewing Filtering Configuration

The following is sample output from the 

show running-config filter

 command:

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments