manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 622 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 622

 

A-8

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Appendix A      Specifications

  Rule Limits

 Filter         576        576       1152

 Fixup         1537       1537       3074

 Est Ctl         96         96         96

 Est Data        96         96         96

 AAA           1345       1345       2690

 Console        384        384        768

-----------+---------+----------+---------

 Total        19219      19219

Partition Limit - Configured Limit = Available to allocate

      19219     -      19219       =           0

Reallocating Rules Between Features

You can reallocate rules from one feature to another feature.

Note

In multiple context mode, you can also set the rule allocation per partition, which overrides the global 
setting in this section. See the 

“Reallocating Rules Between Features for a Specific Memory Partition” 

section on page 4-19

.

Guidelines

Caution

Failure to follow these guidelines might result in dropped access list configuration as well as other 
anomalies, including ACL tree corruption.

•

The target partition and rule allocation settings must be carefully calculated, planned, and preferably 
tested in a non-production environment prior to making the change to ensure that all existing 
contexts and rules can be accommodated.

•

When failover is used, both FWSMs need to be reloaded at the same time after making partition 
changes. Reloading both FWSMs causes an outage with no possibility for a zero-downtime reload. 
At no time should two FWSMs with a mismatched number of partitions or rule limits synchronize 
over failover.

Detailed Steps

To reallocate rules, perform the following steps:

Step 1

To view the total number of rules available, the default values, current rule allocation, and the absolute 
maximum number of rules you can allocate per feature, enter the following command:

hostname(config)# 

show resource rule

For multiple context mode, enter this command in the system execution space. It shows the number of 
rules per partition. See the 

“About Memory Partitions” section on page 4-12

 for more information about 

partitions.

For example, the following is sample output from the 

show resource rule

 command, and shows the 

maximum rules as 124923 in single mode (this is an example only, and might differ from the actual 
number of rules for your system):

hostname(config)# 

show resource rule

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments