manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 382 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 382

 

20-6

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 20      Using Modular Policy Framework

  Configuring Special Actions for Application Inspections (Inspection Policy Map)

This command, which is used in the default global policy, is a special CLI shortcut that when used 
in a policy map, ensures that the correct inspection is applied to each packet, based on the 
destination port of the traffic. For example, when UDP traffic for port 69 reaches the FWSM, then 
the FWSM applies the TFTP inspection; when TCP traffic for port 21 arrives, then the FWSM 
applies the FTP inspection. So in this case only, you can configure multiple inspections for the same 
class map (with the exception of WAAS inspection, which can be configured with other inspections. 
See the 

“Incompatibility of Certain Feature Actions” section on page 20-17

 for more information 

about combining actions). Normally, the FWSM does not use the port number to determine the 
inspection applied, thus giving you the flexibility to apply inspections to non-standard ports, for 
example. 

See the 

“Default Inspection Policy” section on page 22-4

 for a list of default ports. The FWSM 

includes a default global policy that matches the default inspection traffic, and applies common 
inspections to the traffic on all interfaces. Not all applications whose ports are included in the 

match 

default-inspection-traffic

 command are enabled by default in the policy map.

You can specify a 

match

 

access-list 

command along with the 

match default-inspection-traffic

 

command to narrow the matched traffic. Because the 

match default-inspection-traffic 

command 

specifies the ports and protocols to match, any ports or protocols in the access list are ignored.

The following is an example for the 

class-map

 command:

hostname(config)# 

access-list udp permit udp any any

hostname(config)# 

access-list tcp permit tcp any any

hostname(config)# 

access-list host_foo permit ip any 10.1.1.1 255.255.255.255

hostname(config)# 

class-map all_udp

hostname(config-cmap)# 

description "This class-map matches all UDP traffic"

hostname(config-cmap)# 

match access-list udp

hostname(config-cmap)# 

class-map all_tcp

hostname(config-cmap)# 

description "This class-map matches all TCP traffic"

hostname(config-cmap)# 

match access-list tcp

hostname(config-cmap)# 

class-map all_http

hostname(config-cmap)# 

description "This class-map matches all HTTP traffic"

hostname(config-cmap)# 

match port tcp eq http

hostname(config-cmap)# 

class-map to_server

hostname(config-cmap)# 

description "This class-map matches all traffic to server 10.1.1.1"

hostname(config-cmap)# 

match access-list host_foo

Configuring Special Actions for Application Inspections 
(Inspection Policy Map)

Modular Policy Framework lets you configure special actions for many application inspections. When 
you enable an inspection engine in the Layer 3/4 policy map, you can also optionally enable actions as 
defined in an 

inspection policy map

. When the inspection policy map matches traffic within the Layer 

3/4 class map for which you have defined an inspection action, then that subset of traffic will be acted 
upon as specified (for example, dropped or rate-limited).

This section includes the following topics:

•

Inspection Policy Map Overview, page 20-7

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments