manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 709 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 709

 

Glossary

GL-7

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

GTP

GPRS tunneling protocol. GTP handles the flow of user packet data and signaling information 
between the 

SGSN

 and 

GGSN

 in a 

GPRS

 network. GTP is defined on both the Gn and Gp interfaces 

of a 

GPRS

 network.

GUP

Gatekeeper Update Protocol.

H

H.225

A protocol used for TCP signalling in applications such as video conferencing. See also 

H.323

 and 

inspection engine

.

H.225.0

An ITU standard that governs H.225.0 session establishment and packetization. H.225.0 actually 
describes several different protocols: RAS, use of Q.931, and use of 

RTP

.

H.245

An ITU standard that governs H.245 endpoint control.

H.320

Suite of ITU-T standard specifications for video conferencing over circuit-switched media, such as 
ISDN, fractional T-1, and switched-56 lines. Extensions of ITU-T standard H.320 enable video 
conferencing over LANs and other packet-switched networks, as well as video over the 

Internet

.

H.323

Allows dissimilar communication devices to communicate with each other by using a standardized 
communication protocol. H.323 defines a common set of CODECs, call setup and negotiating 
procedures, and basic data transport methods.

H.323 RAS

Registration, admission, and status signaling protocol. Enables devices to perform registration, 
admissions, bandwidth changes, and status and disengage procedures between 

VoIP

 gateway and the 

gatekeeper.

H.450.2

Call transfer supplementary service for 

H.323

.

H.450.3

Call diversion supplementary service for 

H.323

.

Hash, Hash 
Algorithm

A hash algorithm is a one way function that operates on a message of arbitrary length to create a 
fixed-length message digest used by cryptographic services to ensure its data integrity. MD5 has a 
smaller digest and is considered to be slightly faster than 

SHA-1

. Cisco uses both 

SHA-1

 and 

MD5

 

hashes within our implementation of the 

IPSec

 framework. See also 

encryption

, 

HMAC

, and 

VPN

.

headend

A firewall, concentrator, or other host that serves as the entry point into a private network for 

VPN

 

client connections over the public network. See also 

ISP

 and 

VPN

.

HMAC

A mechanism for message authentication using cryptographic hashes such as 

SHA-1

 and 

MD5

.

host

The name for any device on a TCP/IP network that has an IP address. See also 

network

 and 

node

.

host/network

An IP address and netmask used with other information to identify a single host or network subnet for 
FWSM configuration, such as an address translation (

xlate

) or 

ACE

.

HSRP

Hot Standby Routing Protocol. A Cisco-proprietary protocol, HSRP is a routing protocol that provides 
backup to a router in the event of failure.

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments