manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 168 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 168

 

8-26

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 8      Configuring IP Routing and DHCP Services

  Configuring EIGRP

Defining an EIGRP Neighbor

EIGRP hello packets are sent as multicast packets. If an EIGRP neighbor is located across a 
nonbroadcast network, such as a tunnel, you must manually define that neighbor. When you manually 
define an EIGRP neighbor, hello packets are sent to that neighbor as unicast messages.

To manually define an EIGRP neighbor, perform the following steps:

Step 1

Enter router configuration mode for the EIGRP routing process by entering the following command:

hostname(config)# 

router eigrp 

as-num

The 

as-num

 argument is the autonomous system number of the EIGRP routing process.

Step 2

Define the static neighbor by entering the following command:

hostname(config-router)# 

neighbor

 

ip-addr

 

interface

 

if_name

The 

ip-addr

 argument is the IP address of the neighbor. The 

if-name

 argument is the name of the 

interface, as specified by the 

nameif

 command, through which that neighbor is available. You can define 

multiple neighbors for an EIGRP routing process.

Redistributing Routes Into EIGRP

You can redistribute routes discovered by OSPF into the EIGRP routing process. You can also 
redistribute static and connected routes into the EIGRP routing process. You do not need to redistribute 
static or connected routes if they fall within the range of a 

network

 statement in the EIGRP 

configuration.

To redistribute routes into the EIGRP routing process, perform the following steps:

Step 1

(Optional) Create a route-map to further define which routes from the specified routing protocol are 
redistributed in to the RIP routing process. See the 

“Defining a Route Map” section on page 8-5

 for more 

information about creating a route map.

Step 2

Enter router configuration mode for the EIGRP routing process:

hostname(config)# 

router eigrp

 

as-num

Step 3

(Optional) Specify the default metrics that should be applied to routes redistributed into the EIGRP 
routing process by entering the following command:

hostname(config-router)# 

default-metric

 

bandwidth delay reliability loading mtu

 

If you do not specify a 

default-metric

 in the EIGRP router configuration, you must specify the metric 

values in each 

redistribute

 command. If you specify the EIGRP metrics in the 

redistribute

 command 

and have the 

default-metric

 command in the EIGRP router configuration, the metrics in the 

redistribute

 command are used.

Step 4

Choose one of the following options to redistribute the selected route type into the EIGRP routing 
process.

•

To redistribute connected routes into the EIGRP routing process, enter the following command:

hostname(config-router): 

redistribute connected [metric 

bandwidth delay reliability 

loading mtu

] [route-map 

map_name

]

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments